We use the most modern testing techniques
Laboratory for destructive testing and non-destructive examinations ND
Contact us!DESTRUCTIVE TESTING
Destructive testing can be performed on the following types of products:
- Cables up to 65 mm diameter;
- Cables up to 68 mm diameter;
- Chains with a maximum diameter of 48 mm;
- Textile webbing with a nominal load not exceeding 150 tonnes;
- Ship hulls with a maximum breaking load of 300 tonnes.
NON-DESTRUCTIVE TESTING
Non-destructive testing can be performed on the following types of products:
- Cable up to 102 mm diameter;
- Chain up to 68 mm diameter;
- Textile webbing with a nominal load not exceeding 150 tonnes;
- Vessel masts with a nominal load not exceeding 150 tonnes.
State-of-the-art technologies
Contact us!NON-DESTRUCTIVE EXAMINATIONS
Identification of discontinuities on and near the surface. Examination of the surface of materials prone to cracking.
Visual examinations
The procedure is simple, but indispensable, as visual examination requires satisfactory clarity.
Colour contrast
Magnetic particle examination, colour contrast.
UV light fluorescence
Examination with fluorescent magnetic particles in UV light.
DESTRUCTIVE EXAMINATIONS
Destructive checks are carried out on a 1000KN rated breaking load.
Total rupture tests or load tests are carried out for:
- steel cable sleeves with pressed sleeve,
- steel wire rope slings with moulded loops
- steel cable sleeves with pressed steel flamish sleeve.
- Cables with socket terminations
- gread lifting chain. 80 and grade. 100,
- circular polyester webbing,
- polyester ear straps,
- polypropylene, polyester, jute bores.
LABORATORY FACILITIES
- 220V AC-DC magnetic juicers,
- AC-DC magnetic coil D450mm,
- UV lamps,
- Automated test table for UV-visible magnetic fluorescent penetrating liquids etc.
TEST CERTIFICATE
After each test, a Test Certificate is issued containing all the information and measurements resulting from the test, as well as the final result if the product is accepted or rejected.